China Manufacturing Companies for Polyurethane Scraper Squeegee - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

Manufacturing Companies for Polyurethane Scraper Squeegee - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Silk Screen Printing Squeegee Polyurethane , Screen Printing Mesh For T-Shirt , Screen Printing Aluminum Frame , We believe in quality over quantity. Before export of the hair there is strict quality control check during treatment as per international quality standards.

Manufacturing Companies for Polyurethane Scraper Squeegee - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Batch Drying With Vacuum Contact Dryers | Printing Squeegees
8 leading companies that use organic cotton to make clothes and sheets | 100% Polyester Screen Printing

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our enterprise with the long-term to build with each other with consumers for mutual reciprocity and mutual advantage for Manufacturing Companies for Polyurethane Scraper Squeegee - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Algeria , Turkey , Sao Paulo , To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our experienced advice and service can lead to more suitable choice for the customers.

Polyurethane Scrapper

Screen Frame Mesh

Screen Printing Squeegee Holder

Squeegee Scraper

Squeegee Sharpener

Stock Printing Screen Fabric

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!

By Karl from Singapore - 2018.09.08 17:09

The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.

By Aaron from New Delhi - 2017.11.12 12:31

Write your message here and send it to us