China Low MOQ for Manual Screen Printer Machine - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

Low MOQ for Manual Screen Printer Machine - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We believe that prolonged time period partnership is really a result of top of the range, benefit added provider, prosperous knowledge and personal contact for High Tension Screen Printing Mesh , Silk Screen Frame , Sandblasting And Polishing Screen Frame , We intention at Ongoing system innovation, management innovation, elite innovation and market place innovation, give full play into the overall advantages, and frequently strengthen services excellent.

Low MOQ for Manual Screen Printer Machine - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Best throw blanket to buy in 2019 – throw blanket Reviews | Bolting Cloth For Screen Printing
Department of Labour | Bolting Cloth For Screen Printing

Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for Low MOQ for Manual Screen Printer Machine - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Jamaica , Bangkok , Australia , Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.

100% Polyester Printing Mesh

140t Screen Printing Mesh

Aluminum Silk Screen Frame

Polyester Stretch Mesh

Printing Machines Screen

Screen Mesh

The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!

By ROGER Rivkin from Israel - 2018.02.21 12:14

This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.

By Hilda from Zambia - 2017.08.21 14:13

Write your message here and send it to us