China Factory Outlets Aluminum Handle With Rubber Blade - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

Factory Outlets Aluminum Handle With Rubber Blade - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

abide by the contract", conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for Manual Screen Printer , High Tension Silk Screen Printing Mesh , Led Exposure Unit , Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.

Factory Outlets Aluminum Handle With Rubber Blade - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Monarch Color launches new Plastisol Ink for screen printing | Textile Screen Printing Conveyor Dryer
Evaluating the Impact of Powder Size and Stencils on Solder Paste Transfer Efficiency | Flash Dryer Screen Printing

We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for Factory Outlets Aluminum Handle With Rubber Blade - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Sierra Leone , Luxembourg , Luxembourg , We've established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.

Extruded Aluminum Screen Frames

Polyester Filter Mesh

Printing Mesh For Fabric

Pu Screen Printing Squeegee

Screen Printing

Squeegee Aluminum Handle

The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!

By Page from Washington - 2017.07.07 13:00

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!

By Danny from Finland - 2017.01.28 19:59

Write your message here and send it to us