China China New ProductPrinting Machine Frame - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

China New ProductPrinting Machine Frame - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for Aluminum Handle Squeegee Blades , Textile Screen Printing Conveyor Dryer , Screen Printing Mesh For Textile Garment , Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.

China New ProductPrinting Machine Frame - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Can Airline Subscription Plans Save You Money? | 100% Polyester Screen Printing
The Health Benefits of Biking to Work | Flash Dryer Screen Printing

Our target is always to satisfy our customers by offering golden support, superior value and high quality for China New ProductPrinting Machine Frame - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Albania , Colombia , Oslo , We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!

Aluminum Silkscreen Mesh Frames

Cylindrical Screen Printing Machine

Printing Screen Mesh

Silk Screen Frame

Silk Screen Printing Rubber

White Silk Screen Mesh

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Christine from Chile - 2018.02.08 16:45

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Maggie from Algeria - 2018.06.05 13:10

Write your message here and send it to us