China China Cheap price Screen Printing Mesh For Textile Screen Printing - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

China Cheap price Screen Printing Mesh For Textile Screen Printing - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Pu Squeegee For Screen Printing , Aluminum Printing Frames , Screen Printing Aluminum Handle , We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.

China Cheap price Screen Printing Mesh For Textile Screen Printing - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
High-Wire Acts: Adventures at the 2014 SGIA Expo (Part 1) | Printing Squeegees
Cleaning, sanitizing programs are part of the food safety equation | 2019-03-25 | Bolting Cloth For Screen Printing

Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for China Cheap price Screen Printing Mesh For Textile Screen Printing - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Finland , Lyon , Philadelphia , Our experience makes us important in our customer eyes. Our quality speaks itself the properties like it do not tangle, shed or breakdown, so that are our customers will always be confident while placing an order.

100%Polyester Printing Mesh

Aluminum Screen Printing Frame With Mesh

Make Textile Screen Printing Frame

Nylon Mesh

Rubber Scraper

Screen Printing Polyester Mesh

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.

By Anne from Paris - 2018.09.21 11:01

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By trameka milhouse from Nicaragua - 2018.06.18 17:25

Write your message here and send it to us