China Rapid Delivery for Manual Silk Screen Printer - Aluminum emulsion scoop coater – Jiamei factory and manufacturers

Rapid Delivery for Manual Silk Screen Printer - Aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for Screen Polyester Silk Screen Mesh , Silk Screen Printing Frame , 77t Screen Printing Mesh , If you are interested within our products and solutions, you should come to feel absolutely free to ship us your inquiry. We sincerely hope to ascertain win-win company relationships with you.

Rapid Delivery for Manual Silk Screen Printer - Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Evaluating the Impact of Powder Size and Stencils on Solder Paste Transfer Efficiency | Flash Dryer Screen Printing
How to take the leap into 35mm film photography | Flash Dryer Screen Printing

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Rapid Delivery for Manual Silk Screen Printer - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Australia , Ecuador , Naples , Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.

110 Screen Printing Mesh

Aluminum Screen Printing Frame With Mesh

Polyurethane Squeegee Rubber

Stencil Silk Screen Printing Mesh

Textile Printing Polyester Mesh For Screen Printing

Uv Exposing Machine

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.