China professional factory for Monofilament Screen Printing - Aluminum emulsion scoop coater – Jiamei factory and manufacturers

professional factory for Monofilament Screen Printing - Aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for Ink Spatulas , Printing Ink Dryer , High Tension Screen Printing Mesh , Together with our efforts, our products have won the trust of customers and been very salable both here and abroad.

professional factory for Monofilament Screen Printing - Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Our company sticks into the basic principle of "Quality is definitely the life of the business, and status may be the soul of it" for professional factory for Monofilament Screen Printing - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Georgia , Leicester , Los Angeles , To work with an excellent items manufacturer, our company is your best choice. Warmly welcome you and opening up the boundaries of communication. We are the ideal partner of your business development and look forward to your sincere cooperation.

Aluminium Screen Printing Frame