One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei Featured Image
Loading...
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei
  • One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei

One of Hottest for Screen Print Mesh - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for 20x24 Frame , Screen Printing Mesh For T-Shirt , Monofilament Screen Mesh , Accurate process devices, Advanced Injection Molding Equipment, Equipment assembly line, labs and software advancement are our distinguishing feature.
One of Hottest for Screen Print Mesh - Aluminum emulsion scoop coater – Jiamei Detail:

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.

made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.

Also easy to hold, sit easily on flat surface between coats

 

 

Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.

 

V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.

 

a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    

 

 

Choose the right Size :

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

 

14 Inch –OD18″ ×20″ screens.

16 Inch –OD20″×24″ screens .

18 Inch –OD 23″×31″ screens.

20 Inch –OD25″×36″ screens.

 

Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.

5.Each side can be used in emulsion coating process with different thickness.

6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

7.Size can be customized according to customer demand  

 

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: 

Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

 

Application:

OLZ9)%XN$833%NA[F_G$YQW


Product detail pictures:

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

One of Hottest for Screen Print Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
Maybe Bing deserves a Spokane birthday bash | Printing Squeegees
Window/Building Washing System is automated solution for high-rises. Register ico-supplier ico-white-paper-case-study ico-product ico-cad | Flash Dryer Screen Printing

It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for One of Hottest for Screen Print Mesh - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Mauritius , Mauritius , Cannes , Our company insists on the principle of "Quality First, Sustainable Development", and takes "Honest Business, Mutual Benefits" as our developable goal. All members sincerely thank all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.
  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Jean from Liberia - 2018.09.23 17:37
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Beulah from Brazil - 2017.09.22 11:32
    Write your message here and send it to us
    
    TOP