China OEM/ODM Factory Polyester Monofilament Screen Printing Mesh - Aluminum emulsion scoop coater – Jiamei factory and manufacturers

OEM/ODM Factory Polyester Monofilament Screen Printing Mesh - Aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We pursue the administration tenet of "Quality is remarkable, Services is supreme, Status is first", and will sincerely create and share success with all customers for Polyurethane Squeegee Blade , Uv Inks Squeegee Rubber Blade , Monofilament Screen Mesh , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.

OEM/ODM Factory Polyester Monofilament Screen Printing Mesh - Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Sign honours memory of Alliston’s George Ellis | 100% Polyester Screen Printing
Azelis Acquires Chemroy – Covering the Printing Inks, Coatings and Allied Industries | Printing Squeegees

We have been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for OEM/ODM Factory Polyester Monofilament Screen Printing Mesh - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Marseille , Saudi Arabia , Ukraine , The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.

Aluminum Screen Frame