China High definition Screen Printing Aluminum Frame - J.M. M-300 Emulsion remover for screen printing – Jiamei factory and manufacturers

High definition Screen Printing Aluminum Frame - J.M. M-300 Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Manual Micro Registration Screen Printing Machine , Nylon Screen Printing Mesh , Screen Printer Machine , We glance forward to receiving your enquires shortly and hope to have the opportunity to function along with you inside the future. Welcome to acquire a glimpse at our organization.

High definition Screen Printing Aluminum Frame - J.M. M-300 Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
U of T students engineer practical solutions to local problems | Bolting Cloth For Screen Printing
What Is the Fate of the Infant Inclined Sleeper | Printing Squeegees

Our business puts emphasis on the administration, the introduction of talented personnel, as well as the construction of team building, trying hard to further improve the standard and liability consciousness of staff members customers. Our enterprise successfully attained IS9001 Certification and European CE Certification of High definition Screen Printing Aluminum Frame - J.M. M-300 Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Frankfurt , Bahamas , Oman , We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.

Conveyor Drying Tunnel

Screen Printing Mesh Roll

Silk Screen Aluminium Screen Printing Frames

Silk Screen Printing Mesh

Squeegee Rubber Blades

T Shirt Printing Machine

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.

By Claire from Sudan - 2017.12.09 14:01

This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!

By Audrey from Netherlands - 2017.10.23 10:29

Write your message here and send it to us