Factory wholesale Screen Mesh For Printing - Aluminum emulsion scoop coater – Jiamei
Factory wholesale Screen Mesh For Printing - Aluminum emulsion scoop coater – Jiamei Detail:
Product Specification
It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.
| 14 Inch | OD18″ ×20″ screens |
| 16 Inch | OD20″×24″ screens |
| 18 Inch | OD 23″×31″ screens |
| 20 Inch | OD25″×36″ screens |
Product Feature
Easy and comfortable handing.
Easy to cleanup.
Holds more emulsion , Less time refilling & More screens coated,
Chemical-resistant due to its Oxidation surface.
Each side can be used in emulsion coating process with different thickness.
Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.
Size can be customized according to customer demand
HOW TO USE & CLEAN UP
FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.
COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.
CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.
Packing&Shipping
Product detail pictures:
Related Product Guide:
Locally Manufactured Multotec Trommel Screen For Tronox Brand SE Baai Site | Flash Dryer Screen Printing
The 10 Best USWNT Jerseys, Shirts, Hoodies for 2019 Women’s World Cup | Flash Dryer Screen Printing
We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Factory wholesale Screen Mesh For Printing - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Russia , Morocco , Hanover , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Louise
from Nepal
- 2017.11.29 11:09
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Doreen
from Buenos Aires
- 2018.05.15 10:52
