China Factory Promotional Automatic Textile Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei factory and manufacturers

Factory Promotional Automatic Textile Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Polyester Monofilament Mesh , Aluminum Screen Frame , 20x24 Screen Printing Frame , Welcome worldwide customers to contact us for business and long-term cooperation. We will be your reliable partner and supplier of auto parts and accessories in China.

Factory Promotional Automatic Textile Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product FeatureEasy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Cloudburst ruptures Spokesman-Review drain pipe and floods pressroom with thousands of gallons of water | Printing Squeegees
ESMA Pavilion Is the Place to Be for Industrial Printing at FESPA 2019 | Flash Dryer Screen Printing

We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for Factory Promotional Automatic Textile Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Slovak Republic , Botswana , Costa Rica , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.

Aluminum Screen