China Factory Cheap Nylon Mesh - V shape aluminum emulsion scoop coater – Jiamei factory and manufacturers

Factory Cheap Nylon Mesh - V shape aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We often persist with the theory "Quality To start with, Prestige Supreme". We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Polyurethane Squeegee Scraper Blade , Screen Printing Mesh Frame , Screen Polyester Mesh , Welcome to visit our firm and factory. Be sure to come to feel free to get in touch with us in case you need any additional assistance.

Factory Cheap Nylon Mesh - V shape aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product FeatureEasy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Evaluating the Impact of Powder Size and Stencils on Solder Paste Transfer Efficiency | Flash Dryer Screen Printing
10 Game of Thrones Shirts Every Fan Needs Before Series Ends | Bolting Cloth For Screen Printing

Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Factory Cheap Nylon Mesh - V shape aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Washington , Croatia , Japan , Our products are mainly exported to Europe, Africa, America, the Middle East and Southeast Asia and other countries and regions. We have enjoyed a great reputation among our customers for quality products and good services.We would make friends with businessmen from at home and abroad, following the purpose of "Quality First, Reputation First, the Best Services."

Nylon Silkscreen Printing Mesh