China Screen Washout Booths factory and manufacturers | Jiamei

Skrine Washout Maphephe

Short Tlhaloso:

Washout lephephe ke habohlokoa bakeng sa ho boloka ya sebetsang hantle skrine ea khatiso ho lokisetsa le pholosang kamore. Ho lahla e loketseng ea enke, lik'hemik'hale, 'me emulsion ke lihlahisoa-e mahlonoko. Litšila-butle na le monyetla oa ho senya lipompo tsa metsi le ho maswe tsamaiso ea le na le liphello tse kotsi ka tikoloho.

The skrine stensele hlatsoa tsoa mochine e sebediswa bakeng sa ho hlatsoa listensele pele kgahlamelo ya maqhubu a sebetsa kapa ho ntshetsa pele listensele mora sebetsa kgahlamelo ya maqhubu a, hape e sebelisoa bakeng sa ho hloekisa inks tse stencilsafter khatiso.


  • Nomoro ea Mohlala: JM-WT-2
  • Tanka size: 31 * 24 * 31in
  • Gagamalo: 220v / 110v
  • Matla: 48w
  • Polaka: American maemo a, tekanyetso National, European tekanyetso
  • Machine sebelisa lintho tse bonahalang: tšepe poleiti
  • Product Qaqileng

    Tags sehlahisoa

    JM-WT-2  Ema Type Washout Tank Ka LED Light

    图片 1 

    mochini Ena ke thepa e khethehileng hore hloekisa skrine oa khatiso foreime

    图片 2 

    Mosebetsi le litšobotsi tsa mochine ona:

    1.Rinse tanka telele 60 cm,; Bophara 80 cm,, telele 80 cm,; skrine foreime ho loketse boholo ke bolelele cm, 80 ho ea ho 80 cm, bolelele ba 
    2.The back of rinse area install 54*54cm LED flat light(power48W);Can be directly observed during flushing screen mesh;
    3.LED lights isolation plate install 4 mm acrylic transparent board; The waterproof board resistant to cleaning, abrasion resistance, anti-aging, long-term use without deformation, no damage.

    图片 3 

     

    Ka sete pele ba lesira, ho thibela ha spray fafatse ho opareitara e le.
    5.There are three height adjustment holes on both sides of the curtain, So that the curtain can be adjusted up and down 14 cm;according to the height of operator and adjust it.
    6.There are rack in the tank it can be according to screen dimension and rinse screen frame angle in any different positions.
    7.The edge of baffle have water hole,so the water flow into the sewer in time.
    8.With s-shaped odor-proof sewer,the length of it is 300cm.
    9.Put four heights or width of 55cm frame in rack at the same time,when you couldn’t use the rack and push to the side.

     图片 4

    10.The tlaase karolo ya rack taolo metsi a hlomelloa ka floating metsi, 'me metsi setseng skrineng e bokella le ho hloekisa hammoho.
    11.The bottom of water control rack install clapboard,could place tools and materials.
    12.The bottom of machine install wheels,move it at will.
    13.The machine adopts electrostatic spraying,corrosion resistance,resistant to cleaning,no rust.
    14.The machine adopts modular structure;equipped with full set tools and instruction.

    图片 5     

    Ha kenya mochine ena, o tlohang woman stage lebokoseng le aprons sa keneleng metsi, la foreskoto e hlomamisa ka hare lebokose le ho thibela ho dutla.

    Product Code

    JM-WT-2a (110V) JM-WT-2b  (220V)

    Lebitso sehlahisoa

     Ema Type Washout Tank le khanya LED

    HS khoutu

    3922900000

    Product Color

    putsoa

    tanka boholo

    31 * 24 * 31in

    Palo ea li-volts

    220v / 110v

    matla

    48w

    polaka

    American maemo a, tekanyetso National, European tekanyetso

    Machine sebelisa lintho tse bonahalang

    poleiti tšepe

    Machine kalafo holim

    Electrostatic nyanyatsoa

    lintho tse bonahalang le kamano

    Celik kapa zinki plating, nikele plating

    Machine boholo

    31 * 24 * 65in

    Boima bo kahare

    130lb

    Boima bo felletseng

    143lb

    paka boholo

    35 * 35 * 17in

    paka bophahamo ba modumo

    0,34 m3

    paka lintho tse bonahalang

    Export fumigation ntle sebetsana le nyeoe ea lehong

     
     


  • Previous:
  • Next:

  • Ngola molaetsa wa hao mona le e romella re