China Screen Printing Drying Oven factory and manufacturers | Jiamei

Screen Printing Kuyanika Ovuni

Kufotokozera Mwachidule:

makina ndi zipangizo zofunika mu mbale kupanga,

amagwiritsidwa ntchito ziume mbale chophimba pambuyo emulsion TACHIMATA kapena pambuyo kutsuka chophimba mbale.


  • Model: JM kuchita-2
  • Thireyi: 5 zidutswa
  • Max ntchito m'dera: 120 * 90cm
  • Max kutentha: 75 digiri
  • Voteji: 220v
  • mankhwala Mwatsatanetsatane

    Tags mankhwala

    Screen kuyanika nduna
    Dzina: chophimba atayanika nduna
    Model: JM kuchita-2
    chizindikiro:


    1. Thireyi: 5 zidutswa
    2. Max ntchito m'dera: 120 * 90cm
    3. Max kutentha: 75 digiri
    4. Voteji: 220v
    5. Mphamvu: 2000w
    6. Kulemera kwake: 120kg
    7. Phukusi kukula: 124 * 96 * 120cm

    mbali:                                                                         

    1. Wanzeru aganyu kulamulira dongosolo. aganyu ake zikhoza kusintha mogwirizana ndi kutentha kukana yotchinga mauna. Pamene chipinda aganyu ndi 77 ℉ (25 ℃), aganyu ake apamwamba angafikire 172 ℉ (78 ℃).
    2. The mkati anaika ofananira otaya zimakupiza amapanga mpweya otentha mu makope, limene linapatsa ndi aganyu ofanana nduna ndi kusintha kuyanika Mwachangu azungu. The ofananira otaya zimakupiza (mwapadera ntchito zida chachikulu kompyuta) akhoza bwinobwino ntchito pafupifupi 20,000 maola. Iwo amatenga mphindi 2-4 ndi bwino oyanikapo zowonetsera TACHIMATA ndi emulsion photosensitive.
    3. Iwo akugwiritsa masanjidwe (100 misinkhu) aganyu-kusintha dongosolo; mapulogalamuwanso angathe kusintha aganyu malinga yozungulira kutentha ndipo zosiyanasiyana. Iwo akhoza kugwira ntchito mogwirizana akonzedwa aganyu nthawi yanu yotsatira chifukwa cha kuloweza ntchito yake basi.
    4. Izo kwathunthu TACHIMATA popanda dzimbiri ndi dandification. Mtundu kabati ndi kusintha koma wangwiro zolimba. Mitundu yonse ya zowonetsera akhoza adzaikidwa ndipo anasamukira mtu ndi mbali kusindikizidwa kwa mutsimikizira zomatira wosanjikiza yosalala.
    5. The Kutentha mbale akutengedwa zatsopano tsamba ndi wagawo mtundu, ndi awiri kutentha, mphamvu otsika ndi mkulu kutentha kwa dzuwa. Pa nthawi yomweyo, izo amatitsimikizira kutentha kwa makina ngakhale kuti kutentha kwa aliyense pansi ngakhale ndi zolondola.
    6. Total mphamvu 800W.compared ndi miyambo 3000-8000W nduna, makina angapulumutse mphamvu 70-90%.
    7. Inamangidwa ndi zigawo zinayi makabati, 4 mafelemu pansipa 25 "x21" (64 × 53) zikhoza unachitikira pa nthawi yomweyo, kupulumutsa nthawi, kuwongolera dzuwa.
    8. Mkati ndi kunja mbali zonse utenga electrostatic kupopera, akatswiri zinthu, n'zosavuta kuyeretsa ndipo palibe dzimbiri.

    mbali:                                                                              

    1. Wanzeru kutentha Mtsogoleri, kutentha zikhoza kusintha momasuka ndi Max. kutentha ndi 75C.
    2. Ndi nduna anzeru ndi a kusindikiza wabwino
    3. Mukutengera zatsopano kutentha mbale ndi double- kutentha ntchito, dzuwa kwambiri
    4. Mkulu khalidwe mbale kuti kutentha kwa wina thireyi ngakhale ndi zolondola.

    Ntchito:                                                                       
    makina ndi zipangizo zofunika mu mbale kupanga,
    iwo ntchito kuti ziume mbale chophimba pambuyo emulsion TACHIMATA kapena pambuyo kutsuka chophimba mbale.
    Instructions                                                                       
    1. Turn on the switch; then the machine will indicate “F000” and the air fan works automatically.
    2. Press “+” until to “F070’
    3. Place thermometer probe on the third drawer; Check the temp after five minutes.
    4. If the temp is not right in your need, you can press “+” or “-” to increase or reduce 10 grades; Awaiting five minutes then check the temp.
    5. After adjusting the available temp, the machine will automatically save and memory your set data.
    6. It is normal that the “F” or “O” displays alternately when the machine is working.
    Reference data: When the room temperature is 77F (25C) or so, close and seal all drawers, ten minutes later after you have set, the temp indicates—
    1. Set “F050”, the temp is about 93F (34C)
    2. Set “F060”, the temp is about 104F (40C)
    3. Set “F070”, the temp is about 115F (46C)
    4. Set “F080”, the temp is about 126F (52C)
    5. Set “F090”, the temp is about 140F (60C)
    6. Set “F100”, the temp is about 167F (75C)


  • Previous:
  • Kenako:

  • Lembani uthenga wanu apa ndi kulitumiza ilo kwa ife