Cina fabbrica pistola ad aria calda e produttori | Jiamei

Pistola ad aria calda

Breve descrizione:

Temperatura regolabile Hot Digital Air Gun Dryer


  • Numero modello: JM-19
  • Rated Voltage: 220V
  • Rated Output Power: 2000W
  • Air Volume: 250~500L/Min
  • Peso: 1.5KG
  • Dettagli del prodotto

    Tag dei prodotti

    Heat gun with digital display for screen printing

    The Heat gun is a valuable ally in the drying of screen printing inks such as Plastisol.
    This economical drying system does not replace the use of a screen printing tunnel conveyor or a screen printing flash dryer

    47

    Utilizzo del prodotto

    Hot Air Gun Operation Instructions 

    <1> Before use, make sure that it is reliably grounded to prevent static electricity on the tool from damaging the components. 

    <2> should be adjusted to the appropriate temperature and air flow, according to the shape of the nozzle, the characteristics of the work required to adjust the temperature and air flow of the hot air gun; resistors, capacitors and other tiny components of the de-welding time of about 5 seconds, the general IC de-welding time About 15 seconds, the small BGA de-soldering time is about 30 seconds, and the large BGA de-soldering time is about 50 seconds (eg, when the white light 850B hot air gun uses the A1130 nozzle, the air volume is adjusted to 1st gear and the temperature is adjusted to 3.5 files; when the nozzle is not used, the air volume is adjusted to 4 files. ,The temperature adjusts 4 gears.The digital type ATTEN850D uses the A1130 nozzle when the air volume adjusts 3 gears, the temperature adjusts 350 degrees; When not using the nozzle, the air volume adjusts 4.5 gears, the temperature adjusts 380 degrees). 

    <3> When the power switch is turned on, the hot air gun should be preheated to a stable temperature before welding can be performed. When using the soldering iron, uniformly heat the unreachable components at 1~2CM above the components. During the process of desoldering, pay attention to protecting the surrounding elements. Device security. 

    <4> Do not use too much force when installing the nozzle, and do not give a strong impact by tapping the worktable with the soldering iron part to avoid damage to the heating wire and high-temperature glass. 

    <5> The high temperature operation should be very careful. Do not use the heat gun near flammable gas or flammable objects. Pay attention to personal safety, replace parts, and turn off the power and wait for it to cool. Do not unplug the power plug for a long time. 

    6> When the work is completed, turn off the power switch. At this time, start the automatic cooling period. Do not unplug the power plug during the cooling period.

    Specifiche di prodotto

    Adjustable temperature
     60-650℃
    Rated Voltage
    220V
    Rated Frequency
    50/60Hz
    Rated power Input
    2000W
    Air flow
    280-480L/Min
    QTY
    10PCS/CTN

    Main Feature

    48

     

    Applicazione

    Softening the welding material. ; 

    Remove the self-adhesive stickers, old wallpaper and decorative;

    Lifting rust or nuts and metal screws too tight;

    Dissolved the frozen pipes, frozen locks or padlocks, etc.

    Processing grease or replacement of the old mill, first softening;

    For refrigerator defrost;

    Can shrink the PVC film as the protective layer of the packaging;

    Can be used in addition to waxing or wax sledge;

    Shrinkable polyethylene used connecting metal objects;

    Softening the welding material.  

    Shrinkable polyethylene used connecting metal objects;


  • Precedente:
  • Dopo:

  • Scrivi qui il tuo messaggio e inviarlo a noi