China Screen Printing Drying Oven factory and manufacturers | Jiamei

Igwe ọkụ na-ebi akwụkwọ na ihuenyo

Nkọwa dị mkpirikpi:

The igwe dị mkpa akụrụngwa na efere na-eme,

ọ na-eji nkụ ihuenyo efere mgbe emulsion ntekwasa ma ọ bụ mgbe saa na ihuenyo efere.


  • Model: JM-DO-2
  • Tree: 5 iberibe
  • Max na-arụ ọrụ na mpaghara: 120 * 90cm
  • Max okpomọkụ: 75 ogo
  • Voltaji: 220v
  • Product Ihe

    Mkpado ngwaahịa

    Screen ihicha kabinet
    aha: ihuenyo ihicha kabinet
    Model: JM-DO-2
    oke:


    1. Tree: 5 iberibe
    2. Max na-arụ ọrụ na mpaghara: 120 * 90cm
    3. Max okpomọkụ: 75 ogo
    4. Voltaji: 220v
    5. Power: 2000w
    6. Arọ: 120kg
    7. Ngwugwu size: 124 * 96 * 120cm

    atụmatụ:                                                                         

    1. Intelligent temp ịchịkwa usoro. Ya temp pụrụ ịgbanwe dị ka okpomọkụ na-eguzogide nke ihuenyo ntupu. Mgbe ụlọ temp bụ 77 ℉ (25 ℃), ya kasị elu temp nwere ike iru 172 ℉ (78 ℃).
    2. The n'ime arụnyere axial eruba ofufe na-eme ka na-ekpo ọkụ ikuku mgbasa, nke na-akwado ihe hà temp na kabinet na pụrụ imeziwanye ihicha arụmọrụ ugbu. The axial eruba akwado (akpan eji maka nnukwu kọmputa akụrụngwa) nwere ike na-ejikarị ga-eji ihe dị ka 20,000 awa. Ọ na-emekarị na-ewe 2-4 nkeji ọma nkụ meziri ntekwasa na photosensitive emulsion.
    3. Ọ adopts hierarchical (100 etoju) temp-Ịgbazi usoro; ọrụ ike ịgbanwe temp dị ka ihere okpomọkụ ma na dị iche iche ihe. Ọ nwere ike na-arụ ọrụ dị ka gị set temp oge ọzọ n'ihi na nke akpaka n'isi ọrụ.
    4. Ọ na-kpam ntekwasa enweghị corrosion na dandification. The drawer ụdị bụ mgbanwe ma zuru okè uko. All iche iche nke meziri pụrụ enịm ma kwaga flatly na e biri ebi n'akụkụ elu-ekwe nkwa nyagide oyi akwa ire ụtọ.
    5. The kpo oku efere na-adiaha Kacha ọhụrụ agụba na unit ụdị, na abụọ-okpomọkụ, ala ike na elu okpomọkụ arụmọrụ. N'otu oge ahụ, ọ na-emesi okpomọkụ nke igwe ọbụna mee ka okpomọkụ nke ọ bụla n'ala ọbụna na-ezi ezi.
    6. Total ike 800W.compared na omenala 3000-8000W kabinet, a igwe nwere ike ịzọpụta ike 70-90%.
    7. Rụrụ site anọ n'ígwé cabinets, 4 okpokolo agba n'okpuru 25 "x21" (64 × 53) nwere ike ẹkenịmde n'otu oge, na-azọpụta oge, rụọ arụmọrụ.
    8. N'ime na si n'akụkụ niile adopts electrostatic spraying, ọkachamara-ele ihe anya, mfe ọcha na dịghị ajari.

    atụmatụ:                                                                              

    1. Intelligent okpomọkụ njikwa, okpomọkụ nwere ike gbanwere kpamkpam, na-max. okpomọkụ bụ 75C.
    2. Ọ bụ smart kabinet bụ nke ọma akara
    3. N'ịnabata Kacha okpomọkụ efere na double- okpomọkụ ọrụ, ọzọ arụmọrụ
    4. Elu àgwà efere ka okpomọkụ nke ọ bụla tree ọbụna na ziri ezi.

    Ngwa:                                                                       
    The igwe dị mkpa akụrụngwa na efere na-eme,
    ọ na-eji nkụ ihuenyo efere mgbe emulsion ntekwasa ma ọ bụ mgbe saa na ihuenyo efere.
    Instructions                                                                       
    1. Turn on the switch; then the machine will indicate “F000” and the air fan works automatically.
    2. Press “+” until to “F070’
    3. Place thermometer probe on the third drawer; Check the temp after five minutes.
    4. If the temp is not right in your need, you can press “+” or “-” to increase or reduce 10 grades; Awaiting five minutes then check the temp.
    5. After adjusting the available temp, the machine will automatically save and memory your set data.
    6. It is normal that the “F” or “O” displays alternately when the machine is working.
    Reference data: When the room temperature is 77F (25C) or so, close and seal all drawers, ten minutes later after you have set, the temp indicates—
    1. Set “F050”, the temp is about 93F (34C)
    2. Set “F060”, the temp is about 104F (40C)
    3. Set “F070”, the temp is about 115F (46C)
    4. Set “F080”, the temp is about 126F (52C)
    5. Set “F090”, the temp is about 140F (60C)
    6. Set “F100”, the temp is about 167F (75C)


  • Previous:
  • Next:

  • Dee ozi gị ebe a na-ezite ya anyị