China Aluminium emulsion scoop coater factory na-emepụta | Jiamei

Aluminium emulsion scoop coater

Nkọwa dị mkpirikpi:

Emulsion Scoop Coater

1.Easy and comfortable handing.

2.Easy to cleanup.

3.Holds more emulsion , Less time refilling & More screens coated,

4. Chemical na-eguzogide ruru ya ọxịdashọn n'elu.

5. Each side can be used in emulsion coating process with different thickness.

6. Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

7.Size can be customized according to customer demand

a

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container .

Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass.

The coater should be at least two inches shorter that the narrow width of your screen.

Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER:  Scrape extra emulsion back into its container.

Cover the container. Wash out remaining emulsion with water.

Any remaining emulsion that dries in the coater can be very difficult to remove.

Store the coater where the edged can’t be nicked.


  • FOB Ahịa: US $ 0,5 - 9.999 / Ibe
  • Min.Order ibu: 100 Ibe / iberibe
  • Tụkwasịnụ Ikike: 10000 Ibe / iberibe kwa ọnwa
  • model number: JM-09-V
  • material: Aluminum
  • color: sliver
  • type: V-shape
  • Product Ihe

    Mkpado ngwaahịa

    Aluminium emulsion scoop coater

    Emulsion scoop coater bụ a dị mkpa ngwá ọrụ mkpuchi meziri na niile kpọmkwem mmiri mmiri emulsions.
    mere nke inogide aluminum alloy na plastic ọgwụgwụ okpu nduzi, ọ ga-enye gị a mma ọbụna uwe mgbe etinyere na a emulsion scoop coater. Ezubere maka mfe adịgide, ngwa, na nzacha na mkpocha.
    Ọzọkwa mfe ịnọgide, nọdụ mfe na ewepụghị elu n'etiti mkpuchi
    Aluminum emulsion scoop coater, eji maka ibu na scrap emulsion, Large ikike imewe iji hụ ihe emulsion nwere ike loaded.Can ga-eji n'ihi na obosara etiti ma nkenke obibi akwụkwọ.
    V udi aluminum emulsion scoop coater, a ngụkọta ọhụrụ imewe, ọzọ emulsion nwere ike kwajuru, ezi njikwa, mfe ọrụ, ike ga-eji ma abụọ n'akụkụ.
    a ihu nkọ maka mkpa mkpuchi na elu ntupu meziri, na a mechie dull onu maka mkpuchi ala ntupu meziri ma ọ bụ n'ihi mkpuchi okpomọkụ enyefe. Ha jide a ezigbo ego nke emulsion maka ogologo mkpuchi sessions.    
    Na-ahọrọ nri Size:
    Ọ na-adịkarị mma-enweta ihe emulsion scoop coater banyere 2-3 sentimita mkpafa karịa n'ime ihuenyo etiti obosara.
    14 Inch -OD18 "× 20" meziri.
    16 Inch -OD20 "× 24" meziri.
    18 Inch -OD 23 "× 31" meziri.
    20 Inch -OD25 "× 36" meziri.
    atụmatụ:

    1. Easy na ala enyefe.
    2. Easy na nzacha na mkpocha.
    3. Esetịpụ ihe emulsion, Naa oge refilling & More meziri ntekwasa,

    4. Chemical na-eguzogide ruru ya ọxịdashọn n'elu.
    5.Each akụkụ a pụrụ ga-eji na emulsion  mkpuchi usoro dị iche iche na ọkpụrụkpụ.
    6.Included na coater na-ọgwụ kpụrụ nsọtụ na a full snap-on ájá ọta iji gbochie ọ bụla ahụ si agwakọta na na gị emulsion.
    7.Size nwere ike ahaziri dị ka ahịa ina  

    Olee otú iji  & ọcha :

    Jupụta COATER:  N'okpuru a mma odo ìhè isi, wụsa emulsion si ya akpa. Ekwe ka emulsion ndiwet gaa ọbụna larịị. Jide n'aka na ị na-ezuru na uwe onye na ọrịa strok.
    Uwe ihuenyo:  Jiri mechie ọnu a scoop coater itinye ọbụna uwe nke emulsion na otu ngafe. The coater kwesịrị dịkarịa ala abụọ sentimita mkpumkpu na warara obosara nke gị na ihuenyo. Tee otu uwe nke emulsion na-ebi akwụkwọ n'akụkụ, mgbe ahụ onye uwe na squeegee n'akụkụ. Nkụ ihuenyo ọma.
    Hichaa COATER: 
    Bechapu extra emulsion azụ n'ime ya akpa. Ekpuchi akpa. Asachapụghị fọdụrụ emulsion na mmiri. Ọ bụla fọdụrụ emulsion na dries na coater pụrụ isi nnọọ ike na-ewepụ. Echekwa coater ebe ihu-apụghị nicked.

    Ngwa:

    图片 2


  • Previous:
  • Next:

  • Dee ozi gị ebe a na-ezite ya anyị