Tuam Tshoj Aluminium emulsion daus coater Hoobkas thiab manufacturers | Jiamei

Aluminium emulsion daus coater

Luv hauj lwm:

Emulsion Scoop Coater

1.Easy and comfortable handing.

2.Easy to cleanup.

3.Holds more emulsion , Less time refilling & More screens coated,

4. Tshuaj-resistant vim nws Oxidation nto.

5. Each side can be used in emulsion coating process with different thickness.

6. Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

7.Size can be customized according to customer demand

ib

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container .

Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass.

The coater should be at least two inches shorter that the narrow width of your screen.

Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER:  Scrape extra emulsion back into its container.

Cover the container. Wash out remaining emulsion with water.

Any remaining emulsion that dries in the coater can be very difficult to remove.

Store the coater where the edged can’t be nicked.


  • FOB Nqe: US $ 0.5 - 9.999 / Daim
  • Min. Order Quantity: 100 Daim / Daim
  • Mov Muaj peev xwm: 10000 Daim / Daim ib lub hli
  • model number: JM-09-V
  • material: Aluminum
  • color: sliver
  • type: V-shape
  • khoom Nthuav dav

    khoom cim npe

    Aluminium emulsion daus coater

    Emulsion daus coater yog ib tug tsim nyog lub cuab tam rau txheej ntxaij vab tshaus uas tag nrho cov ncaj kua emulsions.
    ua los ntawm check txhuas hlau nrog yas kawg hau ntawm cov, nws yuav muab rau koj ib tug zoo txawm lub tsho tiv no thaum ua ntawv thov nrog rau qhov no emulsion daus coater. Tsim kom yooj yim tuav, daim ntawv thov, thiab tej.
    Tsis tas li ntawd ib qho yooj yim los tuav, zaum tau yooj yim ntawm tiaj ntawm cov tsho tiv no
    Aluminium emulsion daus coater, siv rau load thiab seem emulsion, Loj muaj peev xwm tsim los xyuas kom meej ntau emulsion yuav loaded.Can yuav siv tau rau ntau tus ncej thiab precision printing.
    V zoo txhuas emulsion daus coater, ib tug tag nrho tshiab, ntau emulsion yuav tau loaded, zoo tuav, ib qho yooj yim mus ua lag luam, yuav siv tau ob qho tib si ob sab.
    ib tug ntse ntug rau nyias cov tsho tiv no nyob rau hauv ntau dua mesh cov ntxaij vab tshaus, thiab ib tug npawv npub ntug rau txheej qis mesh cov ntxaij vab tshaus los yog rau txheej thaum tshav kub kub hloov tsheb. Lawv tuav ib tug zoo npaum li cas ntawm emulsion rau lengthy txheej zaug.    
    Xaiv txoj cai Loj:
    Nws yog feem ntau zoo tshaj plaws kom tau ib tug emulsion daus coater txog 2-3 inches nqaim tshaj hauv screen ncej dav.
    14 Nti -OD18 "× 20" cov ntxaij vab tshaus.
    16 Nti -OD20 "× 24" cov ntxaij vab tshaus.
    18 Nti -OD 23 "× 31" cov ntxaij vab tshaus.
    20 Nti -OD25 "× 36" cov ntxaij vab tshaus.
    feature:

    1. Ib qho yooj yim thiab xis handing.
    2. Ib qho yooj yim mus ntxuav tu.
    3. Tuas ntau emulsion, Tsawg lub sij hawm Refilling & Ntau cov ntxaij vab tshaus coated,

    4. Tshuaj-resistant vim nws Oxidation nto.
    5.Each sab yuav siv tau nyob rau hauv emulsion  txheej txheej txheem uas txawv thickness.
    6.Included nrog lub coater yog txhaj molded xaus nrog ib tug tag nrho cov SNAP qhia-plav ntaub thaiv npog los mus tiv thaiv tej hais los ntawm nws nyob rau hauv nrog koj emulsion.
    7.Size yog Mekas raws li cov neeg thov  

    YUAV SIV LI CAS  & ntxuav UP :

    DAIM NTAWV LUB COATER:  Nyob rau hauv ib tug muaj kev ruaj ntseg daj lub teeb qhov chaw, ncuav emulsion ntawm nws cov thawv. Cia lub emulsion ntws tawm mus rau ib tug txawm theem. Xyuas kom tseeb tias koj muaj txaus lub tsho tiv no nyob rau hauv ib tug mob stroke.
    Lub tsho tiv no LUB SCREEN:  Siv cov npawv ntug ntawm ib tug daus coater mus thov ib tug txawm lub tsho tiv no ntawm emulsion nyob rau hauv ib tug pass. Lub coater yuav tsum muaj tsawg kawg yog ob inches luv luv uas lub vos dav ntawm koj npo. Thov ib lub tsho tiv no ntawm emulsion mus rau lub printing sab, ces ib tug lub tsho tiv no rau lub squeegee sab. Qhuav lub screen kom huv si.
    Ntxuav LUB COATER: 
    Txhuam ntxiv emulsion rov qab mus rau hauv nws lub thawv. Npog lub thawv. Ntxuav tawm seem emulsion nrog dej. Tej seem emulsion uas dries nyob rau hauv lub coater yuav ua tau heev yooj yim mus tshem tawm. Cia lub coater qhov twg lub edged tsis tau nicked.

    Daim ntawv:

    图片 2


  • Yav dhau los:
  • Tom ntej:

  • Sau koj cov lus no thiab xa nws mus rau peb