China Screen Washout Booths factory and manufacturers | Jiamei

Pantaila washout kabinak

Deskribapen laburra:

Washout kabina eraginkor serigrafia prestaketa bat mantenduz eta gela aldarrikatuz ezinbestekoa da. tinta, produktu kimiko eta emultsio-produktuak eskura egoki kritikoa da. Hondakinen solidoen potentziala Iturgintza eta putzu-sistemak hondatu dute eta ingurumenean eragin kaltegarriak izan.

pantaila stencil garbitu out Makina garbiketa Stencil egiteko erabiltzen da esposizio prozesatzeko edo esposizio prozesatzeko ondoren Stencil garatzeko aurretik, gainera, stencilsafter inprimatzeko tinta garbitzeko erabiltzen da.


  • Modelo zenbakia: JM-WT-2
  • Tank tamaina: 31 * 24 * 31in
  • Tentsioa: 220V / 110V
  • Potentzia: 48w
  • Plug: American Standard, National estandarra, Europako estandarra
  • Makina material erabiliz: altzairuzko plaka
  • Produktuen xehetasuna

    Produktuen Tags

    JM-WT-2  Stand Mota washout Tank LED argi

    图片 1 

    Makina hau ekipamendu bereziak serigrafia markoaren garbitu dela

    图片 2 

    funtzioa eta makina honen ezaugarriak:

    1.Rinse depositua luze eta 60 cm; Zabalera 80 cm, altuera 80 cm; pantaila-marko egoki tamaina luzera 80 cm eta 80 cm luzera da 
    2.The back of rinse area install 54*54cm LED flat light(power48W);Can be directly observed during flushing screen mesh;
    3.LED lights isolation plate install 4 mm acrylic transparent board; The waterproof board resistant to cleaning, abrasion resistance, anti-aging, long-term use without deformation, no damage.

    图片 3 

     

    Aurrealdeko multzo berean gortina dute, saihesteko denean spray operadorea harrerako du.
    5.There are three height adjustment holes on both sides of the curtain, So that the curtain can be adjusted up and down 14 cm;according to the height of operator and adjust it.
    6.There are rack in the tank it can be according to screen dimension and rinse screen frame angle in any different positions.
    7.The edge of baffle have water hole,so the water flow into the sewer in time.
    8.With s-shaped odor-proof sewer,the length of it is 300cm.
    9.Put four heights or width of 55cm frame in rack at the same time,when you couldn’t use the rack and push to the side.

     图片 4

    10.The uraren kontrol rack behealdean ura erretilu bat ditu, eta gainerako pantailan ura bildu eta garbitu elkarrekin.
    11.The bottom of water control rack install clapboard,could place tools and materials.
    12.The bottom of machine install wheels,move it at will.
    13.The machine adopts electrostatic spraying,corrosion resistance,resistant to cleaning,no rust.
    14.The machine adopts modular structure;equipped with full set tools and instruction.

    图片 5     

    Noiz makina hau instalatzeko, konektatzen mantalak iragazgaitza kutxa batean torlojuak, mantala kutxa barruan instalatuko da isurketa saihesteko.

    Produktuen kodea

    JM-WT-2A (110V) JM-WT-2B  (220V)

    produktuaren izena

     Stand Mota washout Tank LED argi

    HS kodea

    3922900000

    Produktuen Color

    Blue

    Tank tamaina

    31 * 24 * 31in

    Tentsioa

    220v / 110v

    Boterea

    48w

    plug

    American Standard, National estandarra, Europako estandarra

    Makina material erabilita

    altzairuzko plaka

    Makina azalera tratamendua

    electrostatic ihinztatze

    eranskina material

    Altzairu herdoilgaitza edo zinka ionikoa, nikela ionikoa

    Makina tamaina

    31 * 24 * 65in

    Pisu garbia

    130lb

    pisu gordina

    143lb

    Enbalatzeko tamaina

    35 * 35 * 17in

    Enbalatzeko bolumena

    0,34 m3

    Enbalatzeko material

    Export fumigazioa-free egurrezko kasuan

     
     


  • Aurreko:
  • Hurrengoa:

  • Idatzi zure mezua hemen eta bidal iezaguzu